Friday, January 27, 2023
HomeFIRMWARETecno RC6 Network Unlock Firmware 100% Tested with DA File

Tecno RC6 Network Unlock Firmware 100% Tested with DA File

Table of Contents

Tecno RC6 Firmware Flash File MT6739 10.0

Download Stock Firmware Flash File for Tecno RC6:
Official Stock Firmware Flash File Now available for the Tecno RC6 & You can download it from below. by using this firmware you can solve all software Issues on your Tecno RC6 such as hang logo, FRP lock, fastboot Mode, display blank or white after flash, dead recovery, dead after flash etc.

Tecno RC6 Runs on Android 10 and it is Powered by Mediatek MT6769 Processor. it is a dual SIM smartphone support Nano SIM card, connectivity features Include a hotspot, GPS, WIFI, bluetooth 3G & 4G. The device come with 2GB of RAM and 16GB of Storage that can be expandable via SD card.

Tecno RC6 Network Unlock Firmware 100% Tested with DA File

Why We Need Stock Firmware?
to downgrade a Phone
to upgrade a Phone
Fix some serious issue in phone
Remove FRP, Pattern and Pin lock
fix bootloop and software issue on Phone
completely Re-Installation of board software
Pre-Requirement’s
backup NVRAM using this guide
first make a complete backup of your Personal data (if Possible)
charge the device at least 50% to prevent accidental shut down during the process
Firmware Information:
Device Name: Tecno RC6
Type: Full ROM
Size: up to 1.7GB
SoC: Mediatek
Os: Android 10
Password: Null
Gapps: Included
Root access: Not
Firmware Version: Tecno_RC6_MT6739_V003_210107

Download Links:
VCOM Driver: Download
SP Flash tool V5.2 Download
RC6_V003_210107: Download
How to Install Stock Firmware on Tecno RC6:
Extract downloaded stock firmware..
Install Mediatek VCOM driver on Your computer.
Download & extract smartphone Flash tools on your computer
from the flash tool folder Run flash_tool.exe

Go to Download tab Click Scatter and load scatter file from ROM folder

select Download only. Click Download & connect Your switched off Phone to PC by Pressing volume up & down key.

READ MORE:

Samsung SM-N980F Stock Firmware ROM (Flash File)

Samsung SM-X706N Stock Firmware ROM (Flash file)

Samsung SM-A516N Stock Firmware ROM (Flash File)

You can see Flashing Process on screen. after completing unplug & switch it ON
How to Flash Tecno RC6 Via Tecno Flash tool:

Download & Extract Firmware
Download & Extract Tecno flash tool
Install Mediatek VCOM driver on Computer
open the tecno flash tool directory and open the ‘Sowtwaredownloadv4‘ folder and Right-Click on ‘SWD_AfterSales.exe‘ and select ‘run as administrator’ click ‘Yes’ wait for the program to Load
click on grey ‘Settings icon’ on the top-Left corner of the screen.
In the Popup Click load & Select MT6XX_Android_scatter.txt File From Firmware Folder
Connect Your Switched of phone to Computer by Pressing volume up & down Key
Click on Green ‘Start Icon’ on the top-left corner of the screen, Now Flashing will Started with a blue Status bar

Once done, the flashing bar will turn Green, now disconnect your phone from your computer & Switch it ON.

DOWNLOAD
CONTACT ADMIN FOR ACCESS TO FILE: +225 0103281849

 

 

 

RELATED ARTICLES
DONT MISS THIS

Most Popular

Verified by MonsterInsights